Kapco® Clear Polyester Transparency Film
Kapco®
Click Here
Product Page:
Click Here
4 Mil Clear Transparency (Polyester) Film available in various sizes
4 mil Clear Polyester Film for Water-Based Inkjet Printers
Properties:
Product Number: KJTF3000
Caliper/Gauge: 4.7 mil
Material: Gloss Clear Polyester Film
Weight: 140 g/m2
Opacity: Clear
Tensile Strength: 28,000 psi/MD 23,000 psi/TD
Elongation at Break: 150%/MD 110%/TD
Gloss Level: 80 (avg) @ 60°
Printer/Ink Compatibility: Ink saturation level of this product is 300% and gloss film setting on most RIPs is appropriate. Inkjet coating is designed for use primarily with dye based inks. Use of pigmented inks is dependent on application. Product can be printed on Encad/Kodak, Hewlett-Packard DesignJet (2xxx/3xxx/5xxx), ColorSpan Displaymaker and Epson Stylus Pro (7xxx/9xxx).
Ink Dry Time: Varies with type and amount of ink, relative humidity and temperature.
Enviornment:
Printing: 60-80° F, 50% Relative Humidity
Ideal Storage Conditions: 70° F (21° C), 50% Relative Humidity, store in original packaging.
Handling Requirements: Due to absorptive nature of the coating, avoid touching the coated surface with bare skin. Always wear cotton gloves when handling inkjet-coated materials. Rolls are supplied withthe coated surface wound out. When rolling graphics, always roll so that the thinner material is on the outside surface of roll.
Shelf Life: 1 year from ship date when stored in proper conditions.
Finishing/Lamination Can be laminated with either pressure sensitive or low temperature thermal laminate. Before lamination, please allow image to dry for 24 hours.
